Currency : USD $

Commercial Stainless Steel Grease Trap Interceptor Set for Restaurant Wastewater 1#

306

Commercial Stainless Steel Grease Trap Interceptor Set for Restaurant Wastewater 1#

75.89 280.79

Banggood
Commercial Stainless Steel Grease Trap Interceptor Set for Restaurant Wastewater 1#
Commercial Stainless Steel Grease Trap Interceptor Set for Restaurant Wastewater 1#
75.89 280.79

Note:Before using it for the first time, the equipment should be filled with tap water until the oil outlet is not out of water.
Specification:
Size:Approx. 1#:30x20x20cm/ 11.81×7.87×7.87" ;
Approx. 2#:35x25x25cm/ 13.78×9.84×9.84"
Material:Stainless Steel
Removable Baffles for Ease of Maintenance
Keep your kitchen clean
Detachable design, easy to clean, simple installatio
How to install:
The product can be directly installed on the passage through which the oily sewage flows, and the sewage outlet can be aligned with the inlet of the oilwater separator, and can be connected with other equipment by pipes.
The bottom sewage pipe is connected with the sludge dewatering device. If it is not equipped with sludge dewatering device, it can be directly discharged into the sewage pipe.
How it works:
Grease traps work on the basic principal that FOG’s (Fats, Oils & Grease) float on water and solid particles sink. As the inflow of waste water from the sinks enters the grease trap the fats, oils and greases rise to the surface and is trapped between the baffle plates.
The baffles on the outlet prevents FOG’s from flowing directly through the unit. These FOG’s are retained within the unit along with food particles and clean water flows under the baffle plates through the unit to drain. The retained waste collected within the unit can be easily removed at regular intervals using the removable fine mesh filter.
Package Included:
1 x Grease Trap Interceptor Set
1 x Manual

keets
We will be happy to hear your thoughts

Leave a reply

Recommendation
Register New Account
Shopping cart