ESP32 C3 0.42 inch LCD Development Board RISC-V WiFi Bluetooth Arduino/Micropython

322

cheetah 651 Display Screen

ESP32 C3 0.42 inch LCD Development Board RISC-V WiFi Bluetooth Arduino/Micropython

Banggood

9.99 ~~36.96~~

See Deal

ESP32 C3 0.42 inch LCD Development Board RISC-V WiFi Bluetooth Arduino/Micropython

9.99 ~~36.96~~

See Deal

311

Feature:
ESP32C3 is a lowcost microcontroller from Espressif that supports 2.4 GHz WiFi and Bluetooth搴?Low Energy ( Bluetooth 5 (LE)).Use RISC V as the core.There’s a minimum number of pins on this chip, it’s specifically designed to be low cost and for simpler projects than ESP32Sx or ESP32 classics with their large number of GPIO. Think of it more as an intended replacement to the ESP8266 than to the ESP32! It has builtinUSBtoSerial, but not native USB it cannot act as a keyboard or disk drive. The chip used here has 4MB of Flash memory, 400 KB of SRAM.
The ESP32C3 integrates a rich set of peripherals, ranging from UART, I2C, I2S, remote control peripheral, LED PWM controller, general DMA controller, TWAI controller, USB Serial/JTAG controller, temperature sensor, and ADC. It also includes SPI, Dual SPI, and Quad SPI interfaces. There is no DAC or native capacitive touch.
With its stateoftheart power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (IoT), wearable electronics, and smart homes.
Features:
based ESP32C3FH4 WIFI & Bluetooth LE RISCV SingleCore CPU
TypeC USB
4MB Flash
11x IO
1×1.04P connector(GND,3V3,SDA(GPIO5),SCL(GPIO6))
1x RGB(GPIO2)
1x LED(3.3V Power Supply)
1x Reset button(CHIP_EN,great for restarting your program or entering the ROM bootloader)
1x Boot button(GPIO9,entering the ROM bootloader or for user input)
Compatible with MicroPython, Arduinoand ESPIDF
3.3V Regulator with 500mA peak output
Ceramic Antenna
Size & Weight:
Size:23.5 x 18 mm
Weight:2.6g
DOCUMENTS:https://github.com/01Space/ESP32C30.42LCD
Package includes:
1 x